Dr-power Chipper User Manual download pdf (Page 25)

5. Position the Belt onto the Field and Brush Mower Pulley (Figure 47) and then

route it over the two Idler Pulleys and up around the Chipper Pulley (Figure

48).

NOTE: Ensure that the “V” portion of the Belt rests properly into the Idler Pulleys.

6. Move the Belt Release Lever to the “Tighten” position.

NOTE: There is a slot in each of the bottom Tabs of the Belt Guard. These slots must

slide over the Carriage Bolt Guides that are mounted to the inner Frame

Supports of the Chipper (Figure 45).

7. Reinstall the Belt Guard and secure with the Hand Knob.

Belt

Figure 47

Chipper Idler

Pulleys

Field and

Brush Mower

Pulle

Twist Belt to

Engage “V”

Properly into

Idler Pulle

Belt

Figure 48

Idler Pulleys

Chipper

Sprocke

Twist Belt so “V”

Engages Properly into

Chipper Sprocket

Carriage

Bolt for

belt guard

mounting

(one on

each side)

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 31 32

No comments

Dr-power Chipper User Manual Page 25