Dr-power Chipper User Manual download pdf (Page 9)

Note: You may need to use a soft faced hammer to carefully tap the Bolts through

the holes in the next step.

5. Position the Discharge Chute on the side of the chipper and secure with two

Bolts, four Washers (one on each side), and two Locknuts using two 1/2"

wrenches (Figure 8).

NOTE: Ensure that the square in the Carriage Bolts slide fully into the slots in the

Hopper to ensure the bolt heads will rest flush to the Hopper surface.

6. Position the Hopper and secure with four Carriage Bolts (Carriage Bolt Head

inside of Hopper and square of Bolt fully into slots in Hopper), four Washers

and four Locknuts using a 1/2" wrench.

Replacing the Main Field and Brush Mower Harness on machines

with a Briggs and Stratton 12.5 hp Engine (serial numbers from

ATM123741 to ATM126369).

Tools Needed:

 1/2" Wrench

 9mm Wrench

 Wire Cutters

1. Disconnect the Charging Connector from the Engine (Figure 9).

2. Remove the Green Ground Wire from the Engine Mounting Bolt using a

1/2" Wrench.

3. Remove the Engine Kill Wire from the Throttle Linkage using a 9mm Wrench

(Figure 10).

4. Unplug the Blade Control, Key Switch and Operator Presence Connectors

(Figure 11).

5. Cut all Cable Ties that secure the Harness to the machine.

6. Remove the existing Key Switch by pushing in the Tabs underneath and

pulling it from the

Control Panel

(Figure 12).

7. Install the new Key

Switch into the

Control Panel.

Figure 10

Engine Kill

Connector

Figure 8

Bolt, Washers

and Locknut

Discharge

Chute

Hopper

Carriage

Bolt, Washer

and Locknut

Before performing this Harness change, stop the engine, wait five (5) minutes

to allow all parts to cool. Disconnect the spark plug wires, keeping them away

from the spark plugs.

Ground

Connector

Figure 9

Charging

Connector

Blade

Control

Connector

Figure 11

Key Switch Connector

Operator Presence

Connector

Cable Ties

Key

Switch

Figure 12

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 31 32

Comments to this Manuals

No comments

Dr-power Chipper User Manual Page 9

Comments to this Manuals

Related products and manuals for Gardening equipment Dr-power Chipper